POSTAGE

.......................................................................................................   

                 Option 1  (Show - Collections ONLY) 

        DO NOT USE IF YOU REQUIRE YOUR ITEM POSTING

              Option 2  (Normal 48Hour Postage)  All UK Post

              Option 3  (Special Delivery Postage)  All UK Post

LB-Class 26 NEW 2023 'Plug & Play' Version for Heljan 7mm 

The old Screw Terminal decoder is listed too!!

We offer the Loksound XL & Bass Speaker as the optimum high power solution for your twin motored model...................

**For modellers on a budget with small layouts & short trains, the LokSound L option is worth considering ** (OLD MODEL ONLY) Not Pin Type 2023 model

PLEASE NOTE.

WHEN FITTING THE NEW PIN DECODER THERE ARE 2 PINS THAT NEED REMOVING, SEE HELJAN INSTRUCTIONS.

 
Speakers are supplied with these decoders.

Please note, the old Class 26 Model has not got many of the lighting features, as per the list below.

Class 26 Suggested wiring at the bottom of this page for the old screw terminal decoder:

***IMPORTANT: All sound decoders we recommend be sent Insured special delivery***

Function List  (We suggest you print this off, as you might need it later.).

IMPORTANT: 

To alter the overall sounds use CV63 ( 0 to 192 )

To alter individual sounds listed below, you must set the following Indexing CVs (CV31 to 16 and CV32 to 1) 

Function Key Layout for ESU/LOKSOUND XL (PIN TYPE) Plug & Play Sound Decoders.

F0 Directional Light.
F1 Engine On/Off.                                                                                  CV259=128    CV347=100   CV419=150
F2 Playable High Note Horn.                                                               CV435=128  
F3 Playable Low Note Horn.                                                               CV443=128
F4 Buffering Up (If Moving)-Coupling Hook (IF Stationery)          CV283=80
F5 Brake Application (If Moving)- Brake Dump (If Stationery)   CV291=121
F6 Drivers door Slam.                                                                          CV299=228
F7 Compressor.                                                                                    CV307=40 
F8 Drive Hold (Locks Motor drive to simulate heavy load with throttle).    
F9 Variable Speed Flange/Wheel Squeel.                                       CV323=128
F10 Despatch Whistle.                                                                        CV331=128
F11 Not in Use.
F12 Roof Fans. (When Engine is running)                                       CV347=100
F13 Sanders.                                                                                          CV355=50   
F14 Two speed Exhauster.                                                                 CV363=90
F15 Spirax Valves.                                                                                CV315=100  
F16 Disposal Air Dump.                                                                       CV379=128
F17 Windscreen Wipers.                                                                    CV387=128  
F18 Track Detonators (Speed dependant 3 Bang Stop).             CV395=228 (Flash Enabled)

F19 Directional Cab Lights.                                                                 CV427=128
F20 Disable Tail Lights.                                                 
F21 Parking Lights.

F22 Engine Room Lights

CV Changeable Horns.

CV155=0:  High Horn A

CV155=1:  High Horn B

CV155=2:  High Horn C

CV156=0:  Low Horn A

CV156=1:  Low Horn B

CV156=2:  Low Horn C 

OLD SCREW TERMINAL DECODER:

The only Heljan locos that require any lighting resistors are the original first release class 37 and 47, which were fitted with filament bulbs. Every other loco since those, (to our knowledge) have been fitted with led’s, which have their own resistors built into the circuitry. That’s on the lighting board, not the discarded DCC PCB board. So no resistors are required in either the common V+ feed or the switch feed. Any brightness adjustments are done electronically via the usual CV settings.  If you are uncertain of the age of the model fitting a resistance to V+ will do no harm.

Class 26 Suggested wiring at the bottom of this page:

TRKL Track pickup

TRKR Track pickup

MOT+ Motor

MOT- Motor

FL White side lights

RL White side lights

AUX1 Fan (also engine room Class 60)

AUX2 Red tail lights

AUX3 Red tail lights

AUX4 Cab lights

AUX5 Cab light

AUX6 Side and Head (Class 60)

AUX7 Side and Head (Class 60)

SPK1+ Speaker

SPK1- Speaker