• ESU 59620 LokPilot 8Pin (Non Sound) Decoder.

LokPilot 8Pin V5 Decoder 1.5Amp (With up to10 Powered Outputs available) 

Size 21.3mm X 15.5mm X 4.5mm

 

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailCom Plus® the decoders register automatically with a suitable DCC system like the ESU Cab Control.

The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.

The LokPilot 5 DCC decoder recognizes the ZIMO® HLU / ZACK Commands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltage is possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two train stations.

The LokPilot 5 DCC decoder can be used on analog DC trains. The top speed can be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly".

Features

We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCC Decoder at least 10 amplified function outputs with 250mA output current each. In the execution swith PluX22 or 21MTC interface there are 4 outputs to control servos or Logic level outputs added. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.

Motor control

The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

ESU 59620 LokPilot 8Pin (Non Sound) Decoder.

  • Product Code: ESU 59620 LokPilot 8Pin (Non Sound) Decoder.
  • £33.50

  • Ex Tax: £27.92

Available Options


Tags: ESU 59620 LokPilot 8Pin (Non Sound) Decoder.